Plastic (polyethylene)       protective       sleeving    is a cheap        and        safe          means        of      packing         mechanical        products.                                                                                        
 

VANGUARD COOLANTS:                                                  UNISINT 261                                                                        
Alcohol ISO: 10                                                                       
Coolant      completely          synthetic      free      mineral      oil
well       suited       for      grinding      even    for    cutting      of
ferrous metals. Recommended   concentration in water: 3-5%.
SOLOIL BK                                                                         
Alcohol ISO: 32                                                                     
Emulsifiable   oil   of     good   quality   and stability, its power
for   no rust   and foam     is  excellent, suitable for operations
chip  removal  on  ferrous  materials,   aluminum, copper   and 
their    alloys,     high      and    medium     workability.            
Recommended concentration in water: 2-5%.                         

FILTER CLOTH ROLLS:                                                 

TESS 28:     The  non-woven     cloth rolls  are made   of            top-quality    viscose     filaments  and weigh 28 g per  m²          They enable to filter   lubricant/coolant  impurities                          during      grinding operations. The roll   filter   capacity   is   such  as to hold particles up to 45 micron in 
size.     We  can   find   a solution to higher filtration     problems by     providing filter   loth    in     heavier     weight,     e.g.    to    hold     smaller impurities   ( < 45 micron)

High-speed steel blades with hardened teeth are recommended for cutting operations on all the types of metals, including the hardest ones.
The bimetallic blades are made of two welded materials: a very flexible steel silicon core and high-speed steel teeth HSS M2 – Co 8%. The minimum hardness of blade teeth is HRC 63.
They are recommended for cutting operations on structural steel and stainless steel. They are very flexible and highly resistant to torsion.

Available on stock cutters with tree or four helicoidal cutting edges, made of microgrit hard metal, normal/long range in different diameters and length.

CIRCULAR SAWS FOR METAL CUTTING:

The circular saws made of high-tensile, high-speed steel, wolfram-molybdenum (5% molybdenum), are recommended for cutting operations on 50 kg/mm2 - 80 kg/mm2 hard metals and alloys.
Saw range from Ø 175 mm to Ø 600 mm, thickness ranging from 1 mm to 5 mm, with special shapes of teeth made by high-tech CNC machines.